Data Link Connector - Subaru Forester 2004 Service Manual

7. Data Link Connector

A: NOTE
This connector is used both for OBD-II general scan tools and the Subaru Select Monitor.
CAUTION:
Do not connect any scan tools other than the OBD-II general scan tools and the Subaru Select Mon-
itor, because the circuit for the Subaru Select Monitor may be damaged.
1 2 3
9 10 11 12 13
Terminal No.
1 Power supply
2 Empty
3 Empty
4 Empty
5 Empty
6 Line end check signal 1
7 Empty
8 Empty
Data Link Connector
4 5 6 7 8
14 15 16
EN-00037
Remarks
EN(H4DOTC 2.5)-23
Terminal No.
9 Empty
Subaru Select Monitor/OBD-II general scan
10
tool signal
11 Empty
12 Ground
13 Ground
14 Empty
15 Empty
16 Empty
ENGINE (DIAGNOSTIC)
Remarks