Setting The Audio Path; Setting Contact Names To Display During Calls - Avaya one-X 9630 User Manual

Avaya Menu

Setting the audio path

You can set your phone to go off-hook on the Speaker or the Headset when you make an on-
hook call.This setting also determines whether the Voice Dialing feature gets its input from the
Speaker or the Headset.
Procedure
1. Press Avaya Menu.
2. Select Options & Settings or Phone Settings.
3. Press Select or OK.
4. Select Call Settings.
5. Press Select or OK.
6. Select Audio Path.
7. Press Change or OK to change the Speaker or Headset setting.
8. Press Save.

Setting contact names to display during calls

You can set your phone to show the contact's name rather than the calling party name for an
incoming or answered call, a transferred call, or conference call when a calling or called party
number matches a number on your Contacts list.
Procedure
1. Press Avaya Menu.
2. Select Options & Settings or Phone Settings.
3. Press Select or OK.
4. Select Call Settings.
5. Press Select or OK.
6. Select Pair Contacts to Calls.
7. Press Change or OK to change the setting to On or Off.
®
18 Avaya one-X Deskphone H.323 for 9630 and 9630G IP Deskphone User Guide
If the audio path is set to Headset and your headset uses switchhook control
(typically true for wireless headsets), the Voice Dialing feature cannot receive input
from the headset.
Comments? infodev@avaya.com
January 2013