And The Shipping Bracket (C; Frame (55) So That The Treadmill Is More Stable - NordicTrack T9.1 User Manual

6. With the help of a second person, carefully tip
the treadmill onto its right side. Partially fold the

Frame (55) so that the treadmill is more stable;

do not fully fold the Frame yet.
Remove and discard the two indicated bolts (B)

and the shipping bracket (C).

Attach a Wheel (96) to the Base (95) with the
3/8" x 2" Bolt (8) and the 3/8" Nut (10) that you
removed in step 1. Do not overtighten the Nut;
the Wheel must turn freely.
Press a Base Cap (89) into the Base (95).
7. Hold the Left Upright (84) against the Base (95).
Insert two 3/8" x 4" Patch Bolts (7) and a 3/8" x
1 1/2" Patch Bolt (3) with three 3/8" Star
Washers (11) into the Left Upright.
Tighten the 3/8" x 4" Patch Bolts (7) and the
3/8" x 1 1/2" Patch Bolt (3) until the heads of the
Patch Bolts touch the Left Upright (84); do not
fully tighten the Patch Bolts yet.
With the help of a second person, tip the tread-
mill so that the Base (95) is flat on the floor.
6
C
B
89
7
7
11
95
9
8
55
95
96
10
3
84
11