NordicTrack T9.1 User Manual page 11

10. Slide the Right Upright Cover (86) onto the
Right Upright (85). Remove the tie from the
bracket on the Right Handrail (83). If necessary,
press the 5/16" Cage Nut (38) back into place.
Hold the Right Handrail (83) near the Right
Upright (85). Insert the Upright Wire (87)
through the bracket on the bottom of the Right
Handrail. Pull the Upright Wire out of the end of
the Right Handrail.
Attach the Right Handrail (83) to the Right
Upright (85) with two 5/16" x 1" Flat Head Patch
Bolts (14), a 5/16" x 1" Patch Bolt (4), and a
5/16" Star Washer (13) as shown. Do not
tighten the Patch Bolts yet.
11. Set the console assembly face down on a soft
surface to avoid scratching the console assem-
bly. Remove the two #8 x 3/4" Screws (1). Lift
off the Crossbar (107).
10
87
Bracket
14
83
11
1
Console
Assembly
11
38
4
13
86
85
107