Omron CQM1 Operation Manual page 88

LSS Capabilities
Group Name
Utility
Data Area Lists
Change
Addresses
Print Lists
EPROM/Memory
Card
Program
Conversion
Create Library
File
Time Chart
Monitor
(C-series PCs
only)
Instruction Trace
(C-series PCs
only)
Data trace
Set Instructions
(C-series PCs
only)
Retrieve/Save
Instr
(C-series PCs
only)
PC Setup
Allocate UM
(C-series PCs
only)
Edit PC ID
(CVM1 PCs only)
Compare
Programs
(CVM1 PCs only)
Customization
(CVM1 PCs only)
Network Support
Table
File Directory
Management
Copy File
Change File
Name
Delete File
LSS File
Management
78
Displays lists (such as used areas and cross-references) in accordance with the
contents of the user program in the system work area.
Globally changes bit and word addresses in the user program in the system work
area.
Prints lists, ladder diagrams, and mnemonics in accordance with the contents of
the user program in the system work area.
Writes, reads, and compares the user program between the PROM
Writer/Memory Card and system work area.
C500 → C2000H:
Converts C500-family programs to C2000H programs.
C2000H → CVM1:
Converts C2000H-family programs to CVM1 programs
Creates a library on a floppy disk or hard disk for use as an LSS data disk.
Accesses the time chart monitor data produced online.
Accesses the instruction trace data produced online.
Accesses the data trace data produced online.
Used to assign instructions to function codes in the instructions table and to save
and retrieve instructions tables to and from data disk files.
Used to save and retrieve expansion instruction sets to and from data disk files.
Used to set the PC operating parameters in the PC Setup and to save and
retrieve PC Setups to and from data disk files.
Used to allocate parts of the user memory area for used as a Fixed DM Area
and/or I/O Comment Area.
Used to create, edit, search for, or print PC IDs (names).
Used to compare a program in a data disk with the program in the work file in the
computer.
Used to change bit/word names, to define custom data areas, or to register HIS
instructions.
Used to edit data link tables and routing tables for the SYSMAC NET and
SYSMAC LINK Systems.
Displays a file list. Wildcard names can be used to display only desired files.
Copies files on the same floppy disk or between different disks.
Changes the name of a specified file.
Deletes a specified file.
Used to change between LSS-style data files and DOS-style data files.
Description
Section 3-1