Omron CQM1 Operation Manual page 105

Programming Console Operations
• Writing the Word Number
10. Input the second operand and press the WRITE Key to write the instruction
to Program Memory. The next program address will be displayed.
B A
1 0
LR WRITE
Note When an instruction operand is input, the designation of bit or word
can be abbreviated.
11. Write the application instruction.
F A
5 0
WRITE
FUN
Note Decimal-number writing with or without sign cannot be executed by
the CQM1-CPU11-E/21-E.
• Writing a Decimal Number Without Sign
12. It is possible to write the operand in decimal (without sign).
CONT
SHIFT TR
#
13. Write the operand from 0 to 65535.
C F
2 5
Note If an erroneous input is made, press the CLR Key to restore the status
prior to the input. Then enter the correct input.
14. Restore the hexadecimal display.
SHIFT
Note If an input is made outside of the permissible range, a buzzer will
sound and the hexadecimal display will not be displayed.
WRITE
15. It is possible to write the operand in decimal (with sign).
CONT
SHIFT
#
16. Write a value from --32,768 to 32,767. Use the SET Key to input a positive
number, and use the RESET Key to input a negative number.
B A
REC
1
RESET
Note If an erroneous input is made, press the CLR Key to restore the status
prior to the input. Then enter the correct input.
17. Restore the hexadecimal display.
SHIFT
Note If an input is made outside of the permissible range, a buzzer will
sound and the hexadecimal display will not be displayed.
WRITE
00203READ
NOP (00)
00203 ADB DATA A
00203 ADB DATA A
NOT
00203 ADB DATA A
6
00203 ADB DATA A
TR
00203 ADB DATA B
00203 ADB DATA A
TR
#+00000
00203 ADB DATA A
0
#-00010
00203 ADB DATA B
TR
00203 ADB DATA C
Section 3-6
#0000
#00000
#00256
#0100
000
#FFF6
000
95