Set Frequency (0.01Hz Increments) (Network Input Snvt_Count Nviinvsetfreq2); Output Frequency Monitor (0.01Hz Increments) (Network Output Snvt_Count Nvoinvoutfreq2) - Mitsubishi Electric FR-A7NL Instruction Manual

NETWORK VARIABLES
6.7.3 Set frequency (0.01Hz increments) (network input SNVT_count
nviInvSetFreq2)
You can set the frequency command in 0.01Hz increments.
Data Name
nviInvSetFreq2
⋅ Data acceptance timing ........... At network variable receive (nv_update_occurs event)
Example:
If you want to set 120.00Hz, set "12000", the value 100 times greater than the desired frequency.
6.7.4 Output frequency monitor (0.01Hz increments) (network output SNVT_count
nvoInvOutFreq2)
You can monitor the output frequency of the inverter in 0.01Hz increments.
Data Name
nvoInvOutFreq2
⋅ Data send event ...................... When the data changes in 0.01Hz increments
⋅ Data send timing ..................... As set in Pr. 388 Heartbeat send time interval and Pr. 389 Minimum heartbeat
Example:
If the monitor value is 120.00Hz, "12000", the value 100 times greater, is displayed.
64
Initial Value
0.00Hz
Initial Value
0.00Hz
send time. (Refer to page 75.)
Range
0.00Hz to 400.00Hz
Range
0.00Hz to 400.00Hz
Increments
0.01Hz/bit
Increments
0.01Hz/bit