Table of Contents
Advertisement
(3) Operation mode switching method
When "0, 1, or 2" is set in Pr. 340
Switching from the network
Switch to the external
operation mode from
the network.
Network operation
When "10 or 12" is set in Pr. 340
Network operation
For the switching method from the external terminal, refer to the inverter manual (applied).
Refer to page 37 and 66 for a switching method from the network.
CAUTION
⋅ When starting the inverter in network operation mode at powering on or an inverter reset, set a value other than 0 in
Pr. 340. (Refer to page 13)
⋅ When setting a value other than 0 in Pr. 340, make sure that the initial settings of the inverter are correct.
External operation
Switch to the network operation
mode from the network.
Press of of the PU to light
Press of of the PU to light
INVERTER SETTING
Switching from the PU
Press
of
the PU to light
.
.
.
Press
of the
PU to light
.
PU operation
PU operation
4
15
Advertisement
Table of Contents
