Table of Contents
Advertisement
6
NETWORK VARIABLES
6.1 Object Map
This chapter describes detailed object definitions for use of LONWORKS system.
Input network variables
Start/stop and simple speed setting
Inverter input signal
Set frequency write destination selection
Set frequency (0.1Hz/bit)
Set frequency (0.005%/bit)
Inverter
basic
functions
Emergency stop command
PID set point (0.005%/bit)
Inverter PID
PID measured value (0.005%/bit)
control
functions
PID deviation (0.005%/bit)
Inverter
extended
Set frequency (0.01Hz/bit)
functions
Object request
Speed adjustment
Alarm reset
Monitor code
Command request
Node object
Variable Speed Motor Drive
object
Inverter object
Configuration properties
Output network variables
Object status
Speed monitor
Inverter output signal
Output frequency monitor (0.1Hz/bit)
Output frequency monitor (0.005%/bit)
Output current monitor (0.1A/bit)
Output voltage monitor (0.1V/bit)
Actual operation time monitor (1h/bit)
Cumulative power monitor (0.1kWh/bit)
Alarm occurrence definition (string)
Product information(maker name,type)(string)
Emergency stop status
Alarm status
Monitor data
Output frequency monitor (0.01Hz/bit)
Command reply
6
31
Advertisement
Table of Contents
