Output From The Inverter To The Network - Mitsubishi Electric FR-A7NL Instruction Manual

FUNCTION OVERVIEW

5.2 Output from the Inverter to the Network

Main items to be output from the inverter (FR-A7NL) to the network and their descriptions are explained
below.
Item
Object status
Speed monitor
Inverter output signal
Output frequency monitor
Output current monitor
Output voltage monitor
Actual operation time monitor
Cumulative power monitor
Alarm occurrence definition
Product information
Emergency stop status
Alarm status
Monitor data
Command response
REMARKS
Refer to the inverter manual (applied) for functions controllable from the network in each operation mode.
28
You can check the condition of the node.
You can monitor the output frequency in 0.005% increments.
The output terminal status of the inverter can be monitored.
You can monitor the output frequency in 0.1/0.01Hz or 0.005%
increments.
You can monitor the output current in 0.1A increments.
You can monitor the output voltage in 0.1V increments.
You can monitor the actual operation time of the inverter.
You can monitor the cumulative power of the inverter.
At inverter alarm occurrence, you can confirm the alarm definition.
You can output the maker name and type as a character string.
You can confirm the emergency stop status of the inverter.
You can check whether the inverter is in the alarm status or not.
Check the monitor value corresponding to the monitor code set.
You can check the reply to command requests, e.g. operation mode
selection, parameter write, inverter reset, from the inverter.
Description
Refer to
Page
38
41
43
46, 47, 64
48
48
48
49
50
52
54
55
63
70