Calibration Page - AMX Modero ViewPoint MVP-8400 Operation/Reference Manual

Calibration Page

This page (FIG. 57) allows you to calibrate the touch panel for accurate button selection.
FIG. 57 Calibration Page


Always calibrate the panel before its initial use, and after downloading new firmware.
In cases where the touch panel calibration is off to a degree that makes it difficult or
impossible to navigate to this page, you can access it via G4 WebControl, so you can
re-calibrate the panel.
MVP Modero ViewPoint Touch Panels
Press and hold the two lower button on both sides of the display for 6 seconds to access the
Calibration page (see FIG. 88 on page 175).
Press the crosshairs to calibrate the panel and return to the previous page.
Setup Pages
79