AMX Modero ViewPoint MVP-8400 Operation/Reference Manual page 116

Setup Pages
Features on this page include:
Panel Information Page
Back:
WiFi/Wired icon:
Connection Status icon:
Panel Type:
Firmware Version:
Setup Port:
High Port:
High Address:
High Channel:
High Level:
Serial Number:
Setup Pages Version:
Screen Width:
Screen Height:
Screen Refresh Rate:
Screen Rotation:
Power Up Pages:
Start Up String:
Wake Up String:
Sleep String:
File System:
RAM:
Panel Start Time:
102
Saves all changes and returns to the previous page.
The icon to the left of the Connection Status Icon displays whether the current
connection to the Master is Wireless (image of a radio antenna) or Wired
(image of three networked computers).
The icon in the upper-right corner of each Setup page shows online/offline state
of the panel to the master.
• Bright red - disconnected
• Bright green - connected. Blinks when a blink message is received to dark
green every 5 seconds for half a second then go back to bright green.
• Bright yellow - panel missed a blink message from the master. It will remain
yellow for 3 missed blink messages and then turn red. It will return to green
when a blink message is received.
Note: a Lock appears on the icon if the panel is connected to a secured NetLinx
Master.
Displays the model of the panel being used.
Displays the version number of the G4 firmware loaded on the panel.
Displays the setup port information (value) being used by the panel.
Displays the high port (port count) value for the panel.
Displays the high address (address count) value for the panel.
Displays the high channel (channel count) value for the panel.
Displays the high level (level count) value being used by the panel.
Displays the specific serial number value assigned to the panel.
Displays the type and version of the Setup pages being used by the panel.
Displays the screen width (in pixels).
• MVP-8400 = 800
Displays the screen height (in pixels).
• MVP-8400 = 600 pixels.
Displays the video refresh rate applied to the incoming video signal from the
panel.
Displays the degree of rotation applied to the on-screen image.
Displays the page assigned to display after the panel is powered-up.
Displays the start-up string.
Displays the wake up string used after an activation from a timeout.
Displays the sleep string used during a panel's sleep mode.
Displays the amount of Compact Flash memory available on the panel.
Displays the available RAM (or Extended Memory module) on the panel.
Displays the last time the panel booted.
MVP Modero ViewPoint Touch Panels