AMX Modero ViewPoint MVP-8400 Operation/Reference Manual page 80

Setup Pages
Wireless Security: Enterprise Mode (Cont.)
Password:
Certificate Authority:
PEAP Version:
Inner Auth. Type:
Client Certificate:
Private key:
Private Key Password:
Auto PAC Provisioning:
PAC File Location:
Auto Key Renewal:
Cancel/Save:
Wireless Settings
The options on the Wireless Security: Simple Mode and Wireless Security: Enterprise Mode windows
allow you to select from the wireless security methods supported by the NXA-WC80211GCF Wi-Fi
card. These security methods incorporate WPA, WPA2, and EAP technology (some of which require the
upload of unique certificate files to a target panel).
Refer to the Appendix B - Wireless Technology section on page 185 for more further information.
Some encryption and security features may/may not be supported depending on the type of wireless card
being used:
Wireless Security Support
802.11g Wi-Fi CF card: • Open (Clear Text)
Refer to the Configuring a Wireless Network Access section on page 21 for more information on
configuring the panel for wireless network access using the various security options.
66
Press this field to enter a password for wireless access in the Password
keypad. (NOTE: this field is greyed out when selecting EAP-TLS as a Security
Type.)
Press this field to enter the file location for a Certificate Authority certificate in
the Certificate Authority (CA) keypad.
This field is only enabled when selecting EAP-PEAP as a Security Type. Press
this field to cycle between the available installed versions of PEAP.
This field is only enabled when selecting EAP-PEAP or EAP-TTLS as a
Security Type. Press this field to cycle between MSCHAPv2, GTC, OTP, and
MD5.
This field is only enabled when selecting EAP-TLS as a Security Type. Press
this field to enter a file location in the Client Certificate File Location keypad.
This field is only enabled when selecting EAP-TLS as a Security Type. Press
this field to enter a file location in the Client Private Key File Location keypad.
This field is only enabled when selecting EAP-TLS as a Security Type. Press
this field to enter the password for the private key in the Private Key Password
keypad.
This field is only enabled when selecting EAP-FAST as a Security Type. Press
this field to enable or disable the use of PAC files.
This field is only enabled when selecting EAP-FAST as a Security Type, and
only when Auto PAC Provisioning is Disabled. Press this field to enter a file
location in the PAC File Location keypad.
This field is blocked out, but will read "NEVER" when selecting EAP-FAST as a
Security Type.
Press the Cancel button to return to the Wireless Settings Page without saving
any changes. Press the Save button to save all changes and return to the Wire-
less Settings Page.
• Static WEP (64-bit and 128-bit key lengths)
• WPA-PSK
• EAP security (with and without certificates)
• WAP SIte Survey
MVP Modero ViewPoint Touch Panels