Table of Contents
Advertisement
Changing the Ring Type
The ability to change your endpoint's ring type is helpful in close-quartered environ-
ments. Ring types include
To select the ring type for your endpoint:
While in idle mode, press
1.
Press
2.
Press
3.
Press
4.
• Normal Ring: Uses the factory default ring type.
• Vibrator Ring: Causes the endpoint to vibrate for a non-audible call alert.
• Vib/Norm Ring: Causes the endpoint to vibrate for five seconds and then
ring.
Press
5.
Press
6.
Setting Noise Options
The wireless endpoint has three noise options that you can set. The
noise options adjust the audio on the endpoint to account for excessive background
noise.
To set noise options:
While in idle mode, press
1.
Press
2.
Press
3.
include:
• Normal: Used for most office environments.
• High: Used for moderate background noise.
• Severe: Used for extremely noisy conditions.
After you select an option, press
4.
point to the idle display.
®
Inter-Tel
Model 8664/8665 User Guide
Normal Ring
.
FCN
to edit
Ring Type.
0
to edit the
Telephone Ring
0
and
to view the three available ring types. Options include:
*
#
to select the ring type.
0
to exit out of the menus and return the endpoint to the idle display.
FCN
.
FCN
once and then press
#
and
to view the three available high noise options. Options
*
#
,
,
Vibrator Ring
Vib/Norm Ring
.
to edit
High Noise Mode.
0
to exit out of the menus and return the end-
FCN
.
and
High
Severe
51
Advertisement
Chapters
Table of Contents
