Programming Notes - Clifford Arrow 5.1 Installation Manual

programming notes

Note #1: Adding a new transmitter in auto-learn configuration
Press the arm/disarm button of the three-button remote control; the siren will
chirp once.
Note #2: Adding a new transmitter in custom-configuration
For the arm/disarm channel, transmit the channel of the new three or five button
transmitter that you want to control that feature; the siren will then chirp once.
For the rest of the channels, press the desired button on the remote to do the
specified feature.
N N O O T T E E : : When programming a new transmitter to custom configuration, an arm/dis-
arm channel must first be programmed before programming the remaining channels.
Note #3: Selecting siren sounds
After entering this feature, press the arm/disarm button. The siren will generate a five-
second sample of each available siren sound. Perform the following steps to add or
delete that specific sound.
Personalized siren sounds require the use of a 515C in place of the standard
siren.
Add sound: Press
sound to add that sound.
Delete sound: Press
desired sound to delete that sound.
© 2006 directed electronics
on the PlainView 2 Valet switch while playing the desired
on the PlainView 2 Valet switch while playing the
31