Standard Features of the ACE 300 Lifetime Warranty — For as long as you own the vehicle, Clifford will repair or replace the control unit and remote controls free of charge (see warranty card for full details). FACT™—False Alarm Control and Test innovations, FACT absolutely, positively ends recurring false alarms.
Page 5
Standard Features of the ACE 300 Remote Controlled Courtesy Lighting convenience, when you remotely disarm your ACE 300, the interior lights turn on and stay on until you start the engine or 30 seconds, whichever occurs first. Dual-Mode Chirp Silencing —...
Page 6
— Just a few flicks of a switch lets Patented Remote Control Code Learning you match to the system up to 4 different 12-channel Clifford ACG remote controls. Just as easily, a lost or stolen remote control can be deleted from the system memory.
(this works better than holding the button down). The 4-button/12-channel remote control is the key to your system. It has Clifford’s Anti-CodeGrabbing™ (ACG) technology for the ultimate protection against “code-grabbing” devices (see page 8). You will use your remote control to...
What each button/channel does Your ACE 300 remote controls come pre-programmed so that certain channels command certain functions. If you wish, you can actually assign any channel to any function (see pages 13-14). The following chart indicates what each remote control channel number does, and how to transmit each channel number.
Then the thief simply plays back the code when you’re gone, instantly disarming the alarm and unlocking the doors. It’s like giving the thief your car keys. Non-Clifford alarms can be defeated that easily. In contrast, Clifford systems use complex digital signal processing and unbreachable encryption to randomly change the digital code every time you use the remote control.
Enhanced AutoArming™ If this feature is enabled and you forget to remotely arm, ACE 300 automatically arms itself 30 seconds after the doors are closed. For your convenience, if you re-open any door(s) within the 30-second countdown, AutoArming will restart from the beginning once all doors are closed.
Changing the mode requires a minor relay wiring change and installer-only programming. Your local Authorized Clifford Dealer can make the changes for you.
The system automatically bypasses any faulty point and arms all other triggers and sensors to provide the utmost possible protection until you can have the system serviced by your local Authorized Clifford Dealer. TotalRecall™ The system’s memory records the identity of the last activated or malfunctioning trigger or sensor, which allows your installer to instantly track down a malfunction.
Smart prior intrusion attempt alert If you hear three chirps when you remotely disarm, it means that a trigger or sensor was activated in your absence. When you enter the vehicle and turn on the ignition (or start the engine), the LED will blink 1–3 times, pause, then repeat the blink cycle 4 more times.
User-selectable features Your ACE 300 vehicle security system allows you to set many of its features to your own personal preferences. We have made the programming procedures very simple: to make a change, you just flick the valet switch a few times. The system comes from the factory with all of its features pre-programmed as noted in the table below and on the next page.
Turn the ignition off. That’s all there is to it! To change the Adding new remote controls For other drivers in your family, or if you wish to control Clifford systems on your other cars with the same remote control, you can buy additional remote controls from any Clifford Dealer and program them into the system yourself.
Adding new remote controls section on the previous page. ACE 300 is covered by one or more of the following Clifford Electronics U.S.A. patents: 4,158,874; 4,233,642; 4,327,444; 4,383,242; 4,430,685; 4,845,464; 4,887,064; 4,890,108; 4,922,224; 4,997,053; 5,081,667; 5,146,215;...