User Selectable Features Descriptions - Column Two - Clifford Arrow 5.1 Installation Manual

user selectable features descriptions - column two

set pin code
This feature allows the setting of the user's personal PIN code. For more infor-
mation, see programming note #5.
select siren sounds
The individual sounds the 515C siren produces during an full trigger alarm can
be customized for owner recognition of an alarm trigger. For more information,
see programming note #3.
fact2 on/off
On: The alarm will bypass for 60 minutes if zones 3, 5, and 8 are triggered
three times within a one hour period.
Off: The alarm will respond to zones 3, 5, and 8 inputs indefinitely without
bypassing.
remote valet on/off
On: The alarm can be put into valet mode with the remote control.
Off: The alarm can not be put into valet mode with the remote control.
entry delay on/off
On: If the system has passively armed, it will not trigger for 15 seconds after a
door is opened allowing the user to enter the vehicle and disarm the system via
the PlainView 2 Valet switch.
Off: There is no entry delay when armed. The system will trigger instantly when
a door is opened.
reset to default settings
All system settings (except PIN and remote programming) in the User
Programming grid will be reset to their default factory setting as indicated in
bold lettering.
Press the arm/disarm button of the TX; the siren will chirp twice as confimation.
panic on/off
On: The panic feature is available.
Off: The panic feature is not available.
26
www.directed.com