Related Manuals for Clifford 100
Summary of Contents for Clifford 100
- Page 1 World-Class Auto Security...
- Page 2 —Blocks the digital code scanners still used by some thieves. AntiScan™ Remote Door Lock/Unlock Outputs or bad weather! A press of a button on the remote simultaneously arms ACE 100 and locks your car’s power locks. Another press disarms and unlocks. (Some vehicles require optional relays.) Built-In Parking Light Flasher —...
- Page 3 Patented Prior Intrusion Attempt Alert — When you return to your vehicle and remotely disarm your ACE 100, a special chirp and parking light flash sequence will audibly and visually alert you from a distance if an intrusion attempt was foiled while you were away.
- Page 4 The 2-button/3-channel remote controls are miniature radio transmitters powered by a 12-volt batteries. Range is up to 100 feet (a weak remote control battery will reduce range). The remote control is the key to your system. You will use it to arm and disarm the system, lock* and unlock* the doors, activate the panic feature, command options such as a remote trunk release, power window operation, or other accessory.
-
Page 5: Valet Mode
The Piezo Sensor that detects intrusion-related vibrations and impacts. AutoTesting™ Each time you remotely arm your ACE 100, it automatically performs an extensive test of all system triggers and sensors. If the hood or trunk is open when you remotely arm, the system will immediately alert you of the problem by sounding 4 chirps and 4 parking light flashes instead of the usual 2 and 2 (simply disarm, shut the hood or trunk and re-arm to reactivate monitoring of that trigger point). - Page 6 High-output siren Loud siren wail when the system detects an intrusion. Your ACE 100 also has remote controlled chirp muting that is valuable when parking late at night in a quiet residential area or any time when you want to arm or disarm silently.
-
Page 7: User-Selectable Features
User-selectable features Your ACE 100 vehicle security system allows you to set many of its features to your own personal preferences. We have made the programming procedures very simple: to make a change, you just flick the valet switch a few times. The system comes from the factory with all of its features pre-programmed as noted in the table below. - Page 8 Turn the ignition off. That’s all there is to it! To change the Adding new remote controls For other drivers in your family, or if you wish to control Clifford systems on your other cars with the same remote control, you can buy additional Clifford remote controls from any Clifford Dealer (or call our Customer Service Department at 800-824-3208) and program them into the system yourself.