Horizon Fitness EX-69 Owner's Manual page 12

EX-69 ASSEMBLY STEP 2
EX-69 SHOWN
69
EX-
ONLY
NUTS (G)
SPRING WASHERS (F)
FLAT WASHERS (E)
GUIDE RAIL SET
BOLTS (J)
SPRING WASHERS (I)
FLAT WASHERS (H)
MANUAL INCLINE
LIFT LEVER
GUIDE RAIL SET
12
MANUAL INCLINE
LIFT LEVER
BOLTS (D)
MAIN FRAME
HARDWARE FOR STEP 2
BOLT (D) FLAT WASHER (E)
16 mm
35 mm
Qty: 4 Qty: 4
FLAT WASHER (H)
20 mm
Qty: 4
* This step is for EX-69 only.
Open HARDWARE FOR STEP 2.
A
Attach MANUAL INCLINE LIFT LEVER to
B
GUIDE RAIL SET using 4 BOLTS (D), 4 FLAT
WASHERS (E), 4 SPRING WASHERS (F) and
4 NUTS (G).
Align GUIDE RAIL SET with MAIN FRAME as
C
shown.
Lift up on the MANUAL INCLINE LIFT LEVER
D
and place it in one of the holes inside the MAIN
FRAME.
Attach the GUIDE RAIL SET to the MAIN FRAME
E
using 4 BOLTS (J), 4 FLAT WASHERS (H) and
4 SPRING WASHERS (I).
SPRING WASHER (F)
NUT (G)
15 mm
Qty: 4
Qty: 4
SPRING WASHER (I) BOLT (J)
18 mm 25 mm
Qty: 4 Qty: 4