Radio Operations - Clarion DXZ715 Owner's Manual

Radio Operations
FM Reception
For enhanced FM performance the mR61:rUNE~®
tuner includes signal actuated stereo control,
Enhanced Multi AGC, Impulse noise reduction
curcuits and Multipath noise reduction circuits
Changing the reception area
This unit is initially set to USA frequency intervals
of 10kHz for AM and 200 kHz for FM When using
it outside the USA, the frequency reception range
can be switched to the intervals below
• Setting the reception area
1 Press BND button
[IT]
and select the desired
radio band (FM or AM)
2 While pressing DISP button
[j],
each time you
press and hold the number "6" of the Preset
buttons
~
for 2 seconds or longer, the recep-
tion area switches from inside the USA to
outside the USA or from outside the USA to
inside the USA
*
Any station preset memories are lost when the
reception area is changed
Listening to the radio
1 Press FUNCTION button
I]]
and select the
radio mode The frequency is displayed
2 Press BAND button
[IT]
and select the radio
band Each time the button is pressed, the radio
reception band changes in the following order
FM1-+FM2-+FM3-+AM-+FM1
3 Press the right or left side of SEARCH button
[H]
to tune in the desired station
Tuning
There are 3 types of tuning mode available, seek
tuning, manual tuning and preset tuning
Seek tuning
1 Press BAND button
[TI]
and select the desired
band (FM or AM)
*
If "MANU" is lit in the display, press and hold
BAND button
[IT]
for 1 second or longer
"MANU" in the display goes off and seek tuning
is now available
2 Press the right or left side of SEARCH button
[H]
to automatically seek a station
When the right side of SEARCH button
[H]
is
pressed, the station is sought in the direction
of higher frequencies; if the left side of
SEARCH button
[H]
is pressed, the station is
sought in the direction of lower frequencies
Manual tuning
There are 2 ways available Quick tuning and step
tuning
When you are in the step tuning mode, the fre-
quency changes one step at a time In quick tun-
ing mode, you can quickly tune the desired fre-
quency
1 Press BND button
[IT]
and select the desired
band (FM or AM)
*
If "MANU" is not lit in the display, press and
hold BND button
[TI]
for 1 second or longer
"MANU" is lit in the display and manual tuning
is now available
2 Tune into a station
• Quick tuning:
Press and hold the right or left side of
SEARCH button
[H]
for 1 second or longer to
tune in a station
• Step tuning:
Press the right or left side of SEARCH button
[H]
to manually tune in a station
Recalling a preset station
A total of 24 preset positions (6-FM 1, 6-FM2, 6-
FM3, 6-AM) exists to store individual radio sta-
tions in memory Pressing the corresponding pre-
set button recalls the stored radio frequency au-
tomatically
1 Press BND button
[IT]
and select the desired
band (FM or AM)
2 Press the corresponding Preset button
~
to
recall the stored station
*
Press and hold one of Preset buttons
~
for 2
seconds or longer to store that station into pre-
set memory
Manual memory
1 Select the desired station with seek tuning,
manual tuning or preset tuning
2 Press and hold one of Preset buttons
~
for 2
seconds or longer to store the current station
into preset memory
Auto store
Auto store is a function for storing up to 6 sta-
tions that are automatically tuned in sequentially
If 6 receivable stations cannot be received, a pre-
viously stored station remains unoverwritten at
the memory position
1 Press BND button
[IT]
and select the desired
band (FM or AM)
l 1)(27 1 ~:) / !
!)( [
J
II )