Clarion DXZ715 Owner's Manual page 24

AC Processor Operations
G.EQ effect ON/OFF
While the "G EQ" indication
1m
is lit in the dis-
play, the G EO effect is set to "ON"
*
The factory default setting is "ON"
1 Press A-M button
[J1]
and select "G EQ"
2 Press DISP button
[g]
3 Press A-M button
[J1]
"G EQ" in the display lit
or unlit
*
When "G EO" is unlit, the G EQ effect is set to
OFF
Note:
• If the G EO effect is set to OFF, the adjustment
mad~~.in
"G
EO operations" is not reflected in the
music source
Selecting a G.EQ menu
1 Press A-M button
[J1]
and select "G EQ"
2 Press BND button
[DJ
to select "BASC" (ba-
sic) "BASC" is displayed in the operation
status indication
m
in the display
3 Press one of Direct buttons ~ and select the
desired G EO menu
*
To select the user memory, press BND button
[TI]
to select "USR" and press one of 'Direct
buttons [[]
Editing/storing a G.EQ menu (User
memory)
1 Select a G EO menu which you want to edit
on the basis of
2 Press and hold ADJ button []] for 1 second or
longer
3 Press the right or left side of SEARCH button
[B]
to select the frequency to be adjusted
There are 50Hz, 100Hz, 200Hz, 400Hz, 1kHz,
3kHz and 12kHz available for the adjustment
frequency
*
For details on each adjustment item, refer to the
owner's manual supplied with the DPH910
4 Turn the Rotary knob
[Nl
clockwise or counter-
clockwise to make the adjustment The adjust-
ment range is from
-6
to
6
5 Repeat steps 3 to 4 to complete the adjust-
ment and press ADJ button []]
6 Press and hold one of Direct buttons ~ for 2
seconds or longer to store the edited contents
*
You can give a title to the user memory For
the inputting method of titles, refer to the
subsection "Entering titles" in section "Opera-
tions common to each mode"
24
DXZ715/HX-D10
STD mode/DSF operations
DSF effect ON/OFF
When the "DSF" indication
II
is lit in the display,
the DSP effect is set to "ON"
*
The factory default setting is "ON"
1 Press A-M button
[J1]
and select "DSF"
2 Press DISP button
[g]
3 Press A-M button
[J1]
"DSF" in the display lit
or unlit
*
When "DSF" is unlit, the DSF effect is set to OFF
Note:
• If
the DSF effect is set to OFF, the adjustment
made in "DSF operations" is not reflected in the
music source
Setting the listening position menu
1 Press A-M button
[J1]
and select "DSF"
2 Press the right or left side of SEARCH button
[B]
to set the listening position type
There are FULL SEAT, FRONT-R, FRONT-L,
FRONT (only front seats), REAR (only rear
seats) and PASS available for the listening
position types
*
The factory default setting is "FULL SEAT"
Making fine adjustment of the
listening position
1 Upon completion of setting the listening
position, press ENT button
[1]]
2 Press the right or left side of SEARCH button
[B]
to select "BALANCE" or "FADER" The
selected item blinks
3 Turn the Rotary knob
[Nl
clockwise or counter-
clockwise to adjust the balance and the fader
4 Press ENT button
[1]]
to return to the DSF
mode
Selecting a sound field menu
1 Press A-M button
[J1]
and select "DSF" "DSF"
blinks in the display
2 Press BND button
[DJ
to select "BSC1" (ba-
sic-1) or "BSC2" (basic-2) "BSC1" or "BSC2"
is displayed in the operation status indication
m
in the display
3 Press one of Direct buttons ~ and select the
desired sound field menu
*
To select the user memory, press BND button
[TI]
to select "USR" and press one of Direct
buttons [[]