Radio Operations - Clarion CZ215E Owner's Manual

Radio Operations

RDS (Radio Data System)
This unit has a built-in RDS decoder
system that supports broadcast stations
transmitting RDS data. When using the
RDS function, always set the radio to FM
mode.
If EON (Enhanced Other Network)
information is received, this information
enables automatic switching of other
preset station on the same network and
interruption of the station being received
with traffic information from other
stations(TA).
Listening to the radio
1. Press [SRC] button and select the radio
mode.
2. Press [BND] button and select the radio
band in the following order:
FM1 FM2
AM2 (MW/LW)
Switching display
Each time you press the [DISP] button to
change the display.
PS name PTY name
text PS name ...
Notes:
• If there is no PS name, frequency will be
displayed.
• If there is no radio text, " NO R-TEXT" will
appears in the display.
Manual tuning
Press [x] or [v] button to manually
tune a station.
Seek mode setting
2 types of seek tuning: DX SEEK and
LOCAL SEEK.
DX SEEK can automatically tune in to
receivable broadcast stations; LOCAL
SEEK can tune in to only broadcast
stations with a good reception sensitivity.
∗ The factory default setting is "
1. Select "DX/LO" in system setup items.
2. Turn [ROTARY] knob to select a seek
mode.
14
CZ215E/CZ315E
FM3 AM1 (MW/LW)
FM1...
Clock Radio
DX
".
Seek tuning
1. Long press [x] or [v] button to
automatically seek a station.
Recalling a preset station
A total of 30 preset positions (6-FM1,
6-FM2, 6-FM3, 6-AM1, 6-AM2) exists to
store individual radio stations in memory.
Press the corresponding [1]~[6] button
to recall the stored radio frequency
automatically.
Manual store
1. Long press [1]~[6] button to store the
current station into preset memory.
Band scan
Band scan is searching for good
reception stations from current frequency
to higher frequency repeatedly. When a
good reception stations is searched, it will
be listened in 7s. And then it continues
scan.
1. Press [BND] button to select a band.
2. Long press [BND] button.
Auto store
Auto store is a function for storing up to 6
stations that are automatically tuned in
sequentially. If 6 receivable stations
cannot be received, a previously stored
station remains unover written at the
memory position.
"
1. Select AUTO STORE
items.
2. Long press [ROTARY] knob.
The stations with good reception are
stored automatically to the preset
channels.
∗ If auto store is performed in the FM bands,
the stations are stored in FM3.
If auto store is performed in the AM bands,
the stations are stored in AM2.
AF (Alternative Frequency)
function
The AF function switches to a different
frequency on the same network in order
"
in system setup