Error Displays - Clarion DXZ715 Owner's Manual

If an error occurs, one of the following displays is displayed
Take the measures described below to eliminate the problem
A CD cannot be played due to scratches, Replace with a non-scratched,
etc non-warped-disc
A CD is loaded upside-down inside the CD Eject the disc then reload it properly
deck and does not play
This is a failure of CD deck's mechanism
and consult your store of purchase
Eject the disc then reload it properly
Lower the surrounding temperature and
wait for a while to cool off MD changer
Eject the disc then reload it properly
This is a failure of MD changer's mecha-
nism and consult your store of purchase
Replace with a non-scratched, non-warped
disc
Load a pre-recorded MD in the MD
changer
A CD is caught inside the CD deck and is
not ejected
A CD inside the CD changer is not loaded This is a failure of CD changer's mecha-
nism and consult your store of purchase
An MD inside the MD changer is not
loaded
A CD inside the CD changer cannot be Replace with a non-scratched, non-warped
played due to scratches, etc disc
A CD inside the CD changer cannot be
played because it is loaded upside-down
Displayed when the temperature in the
MD changer is too high and playback has
been stopped automatically
An MD inside the MD changer cannot be
played due to scratches, etc
Displayed when a non-recorded MD is
loaded in the MD changer
An MD inside the MD changer cannot be
played because it is loaded upside-down
ERROR 3
ERROR 6
ERROR 2
ERROR 3
ERROR H
ERROR 2
ERROR 3
ERROR 6
If an error display other than the ones described above appears, press the reset button If the problem
persists, turn off the power and consult your store of purchase
OXZ715/Hx-n10
33