Radio Operations - Clarion NX501E Owner's Manual & Installation Manual

2-din dvd multimedia station with built-in navigation & 6.2” touch panel control
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1

15. RADIO OPERATIONS

Listening to the Radio
1. Touch the [Tuner] button on the Main menu display.
The tuner mode screen is displayed.
2. Press the [FM1/2/3/AM] button or touch the [Band]
key on remote control to select the radio band. Each
time the button is pressed, the radio reception band
changes in the following order:
FM1->FM2->FM3->AM ->FM1...
7
8
4
1
1. Preset Scan Button
2. Direct Button
3. Preset List Button
4. Frequencies Display
5. Tune Up
6. Tune Down
7. Band Display
8. LOC/DX Display
9. Bluetooth Display
10. RDS Station Display
11. System Time
Seek Tuning
1. Press the [FM1/2/3/AM] button to select the radio
band (FM or AM).
2. Touch the [
] key, and then flick the BIG
Frequency up and down to search for next available
station.
• When flick the frequency up, the station is searched
in the direction of higher frequency.
• When flick the frequency down, the station is
searched in the direction of lower frequency.
9
10
11
5
6
2
3
Step Tuning
1. Press the [FM1/2/3/AM] button to select the radio
band (FM or AM).
2. Touch the [ ] or [ ] key in frequency panel to tune
up or down by one step.
Recalling a preset station
1. Press the [FM1/2/3/AM] button to select the desire
band (FM or AM) on the tuner.
2. Touch the [
] key, Press the preset station
(1 to 6) on preset list.
3. Press the [ ] key, then press the [
auto search and store the stations.
Manual memory
1. Touch the desired Band key to select the band you
wish to store.
2. Tune to a station you want to store using the seek
tuning, step tuning, or preset tuning.
3. Touch and hold the desired Preset key you want to
store for about 3 seconds.
Auto Store
The Auto Store is a function for storing up to 6 stations
that are automatically searched in sequentially. If the
number of receivable stations cannot reach to 6, the
previous stored station remains.
1. Touch the [FM1/2/3/AM] key to select the desired
band. (FM or AM)
2. Press the [ ] key, and then press the [
start the Auto Store.
A beep sounds and the stations with good reception
are stored automatically to the preset list.
] button to
] key to
NX501E/NZ501E
43

Advertisement

Table of Contents
loading

This manual is also suitable for:

Nz501e

Table of Contents