Connect To The Network; A - Connect The Ethernet Cable - LaCie 2BIG User Manual

CONNECT TO THE NETWORK

This chapter explains how to connect your LaCie NAS to a network.
Important Info: If your 2big NAS did not include disks, you must install and initialize them before following
the steps below. See

A - CONNECT THE ETHERNET CABLE

1. Connect the Ethernet cable to the Ethernet port on the back of the product.
2. Connect the other end of the Ethernet cable into an available Ethernet "out" port on your router or hub (refer
to your router or hub's documentation if necessary).
2big NAS User Manual
Adding Disks to an Empty Enclosure for details.
8