Connect The Interface Cable - LaCie 301258U - 2big Network NAS Server User Manual

LaCie 2big Quadra
User Manual

2.1. Connect the Interface Cable

1. Plug one end of the interface cable (USB, FireWire or eS-
ATA) into the corresponding port on your host computer.
2. Connect the other end of the cable to the matching port
on the 2big.
TECHNICAL NOTE: If two interfaces are connected at the
same time, the first one connected remains active and the sec-
ond will not work.
•
DESIGN BY NEIL POULTON
FireWire 800
FireWire 400
eSATA
USB 2.0
safe big
fast
mixed
off auto on
Setup
page 13