Adding Disks To An Empty Enclosure; Choose Compatible Disk(S) - LaCie 2BIG User Manual

ADDING DISKS TO AN EMPTY ENCLOSURE

Note: This section only applies to new, diskless LaCie NAS enclosures. When following the
directions below, please install one or more disks that have not been formatted and do not
contain system information. If you purchased a 2big NAS with hard disks pre-installed in one or both disk
slots, do not follow these steps – instead, install the product by following the steps in network. Note that the
2big NAS does not need to be connected to the network during the below process.

1. CHOOSE COMPATIBLE DISK(S)

When adding a new disk to an empty slot, consider a
prepared and optimized for use with LaCie NAS.
If you are installing non-LaCie disks, please check the list of supported
guarantee performance or functionality when using unsupported disks.
Only 3.5" SATA II disks may be used in the NAS enclosure.
LaCie recommends selecting disks that are equal in storage capacity. For example, if the first disk has a 1TB
disk, fill all the slots with 1TB disks.
2big NAS User Manual
LaCie 2big Spare Drive. LaCie disks are specially
Network Hard Drives. LaCie cannot
11