Email Notification Triggers; Auto Update; Update Product Operating System - LaCie 2BIG User Manual

EMAIL NOTIFICATION TRIGGERS

The following events will trigger an email notification if an email address has been provided in the User page:
Event Identifier Description
Capacity When the total available capacity is less than 90%
When a download has completed or when a download error
Download
has occurred
Backup When a backup begins, ends, is cancelled, or fails
Fan When the fan stops
The product has remained at maximum temperature for at
Temperature
least one minute
Password recovery A user has recovered his/her password
AUTO-UPDATE
Your LaCie NAS will automatically check if an operating system update is available from the update server, and
will install it for you.

Update Product Operating System

LaCie may improve your LaCie NAS' software or add new features over time. See below for updating information.
Note that there are two ways of checking for new product software, from the Dashboard or using LaCie Network
Assistant.
Important Info: During the update process, the front LED will blink red and blue.
Update Using the Dashboard
1. Launch the Dashboard and navigate to the Support page.
2. To set up your NAS to update itself automatically, Under AUTO-Update, click the configuration icon. Then
click the AUTO-Update box and select a frequency and time for the NAS to check the update server.
2big NAS User Manual
Recipient
Admin
Admin
Admin
Admin
Admin
Admin or user, depending
on who made the request
101