Eco Management - LaCie 2BIG User Manual

ECO MANAGEMENT

Status light on: Uncheck this box to turn off the front blue light. Note that this will not disable warning
indicators or rear disk LEDs.
Turn off hard disk: Set the duration of inactivity after which the disks will revert to Eco mode, which spins
down the disks and reduces power consumption. The product leaves Eco mode automatically when a request
is sent to the drive.
Deep sleep enabled: Deep sleep means that the drive will enter a very low energy consumption mode when
you activate it using the Shutdown Options button on the Dashboard. This mode can also be triggered by
clicking and holding the front blue button. To wake the drive from Deep Sleep Mode, press the blue button or
use the Wake on LAN function in the LaCie Network Assistant (see
Important info: When deep sleep mode is activated, all processes, including downloads and backups, will
be terminated.
Scheduled power on/off: Set the drive to activate/deactivate deep sleep mode at a certain time to save
energy.
UPS Management: Your LaCie NAS supports UPS (uninterrupted power supply) management. If you connect
a supported UPS device to the NAS' USB port, in the Dashboard you will see modifiable parameters. In the
left-hand column, a bullet will indicate power supply status.
If green, power is being supplied through the power cable.
If gray, power is not being supplied through the power cable.
On the right, under the heading Battery threshold level (%), you can choose a minimum percentage of
2big NAS User Manual
Wake on LAN (WOL)).
74