Installing A Headset (No Feature Control Switch); Handling Calls With A Headset (No Feature Control Switch) - Mitel 5224 Manual

A headset can be used either in regular answer mode or with the Auto Answer
feature programmed.
Most headsets are installed using the same jack that the handset plugs into. Mitel
Networks Headsets with Feature Control Switch (PN 9132-800-500-NA/ 9132-
800-501-NA) plugs into the dedicated headset jack (the jack nearest the front of
the set).

Installing a Headset (no Feature Control Switch)

To install the headset for your use
1. When the telephone is not in use, lift the handset from the cradle and
carefully turn the set upside down.
2. Unplug the handset cord where it connects to the telephone.
3. Plug in the headset cord in the same place.
4. Set the telephone upright and press the Headset feature key.
5. Store your handset in a safe place.
To return to handset operation
1. When the telephone is not in use, lift the handset from the cradle and
carefully turn the set upside down.
2. Unplug the headset cord where it connects to the telephone.
3. Plug in the handset cord in the same place.
4. Set the telephone upright and return the handset to the cradle.
5. Press the Headset Feature Key.
6. Store your headset in a safe place.

Handling Calls with a Headset (no Feature Control Switch):

To answer a call (when Auto Answer is disabled):
•
Press the flashing Line Select key.
To hang up:
•
Press the Cancel Function Key.
15