Table of Contents
Advertisement
Troubleshooting Guide
Head Overheat...
PRINT or CANCEL?
The printer has detected an abnormally high temperature on the printhead. The
following conditions have caused this problem.
1. If the printer has been printing labels continuously, allow the printer to
cool for a few minutes and press the
error reoccurs regularly improve the ventilation around the printer or
reduce the temperature around the printer.
2. The printhead is defective. Contact qualified service personnel.
!
WARNING: The printhead bracket and printhead will be very HOT
when the printhead has overheated.
HALT...
Cycle the power and try operating the printer again. If the message reoccurs,
contact qualified service personnel.
CW1 BIOS TRAP!
System Halted!
Cycle the power and try operating the printer again. If the message reoccurs,
contact qualified service personnel
ENTER
key to continue printing. If the
PRINT
52
Advertisement
Table of Contents
