Operator Panel Settings For Data Communications - AMT Datasouth Codewriter 4500 Series Operator's Manual

Data Communications

Operator Panel Settings for Data Communications

The following procedure guides the operator through setting data communications
parameters on the printer.
Setting the Baud Rate
1. Press the
2. With the Interface Status Off-Line displayed, press the
will take you the to the listing of sub-menus.
3. Press the
4. Press the
5. Use the
[300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600].
Complete the selection process by pressing the
will appear in front of the selected value.
Setting the Flow Control Method
6. Press the
7. Use the
[Hardware, Xon/Xoff Normal, Xon/Xoff Robust].
Complete the selection process by pressing the
will appear in front of the selected option.
Setting RTS Polarity
8. Press the
9. Use the
[Online = High, Online = Low].
Complete the selection process by pressing the
will appear in front of the selected option.
ONLINE
key. This takes you to the off-line menu.
PAUSE
MENU
key until the I/O Config. option is displayed.
ITEM
key. Baud Rate is displayed.
FEED
or keys to set the Baud Rate value
CANCEL
ITEM
key. Flow Control is displayed.
FEED
keys to set the Flow Control method
or
CANCEL
ITEM
key. RTS Polarity is displayed.
FEED
keys to set the RTS Polarity
or
CANCEL
24
MENU
key. This
ENTER
key. An asterisk (*)
PRINT
ENTER
key. An asterisk (*)
PRINT
ENTER
key. An asterisk (*)
PRINT