ENGINE ASSEMBLY AND ADJUSTMENT
INSTALLING THE STARTER SYSTEM
1. Install:
• bushing
• bearing
• starter wheel gear
• starter clutch
NOTE:
• Apply grease with a lithium soap base on
the bearing
• Apply molybdenum disulphide oil on the pin
(starter clutch)
2. Install:
• flat washer
• idle gear
• flat washer
• plate
(intermediate gear)
Screw (intermediate gear plate)
8 Nm (0.8 m • kg)
NOTE:
Apply engine oil on the intermediate gear
3. Install:
• starter motor
Screw (starter motor)
13 Nm (1.3 m • kg)
NOTE:
Apply grease with a lithium soap base on the
o-ring of the starter motor.
4-30
ENG
.
.
.