Changing The Transmission Oil; Autolube Pump Air Bleeding - Yamaha CS50 Service Manual

2
4
CS50
CS50Z

CHANGING THE TRANSMISSION OIL/

AUTOLUBE PUMP AIR BLEEDING

CHANGING THE TRANSMISSION OIL
1. Remove:
• drain bolt
Drain the transmission oil.
• oil filler cap
2. Inspect:
• gasket (drain bolt)
• o-ring (filler cap)
Damaged
3. Install:
• gasket
• drain bolt
Drain bolt
18 Nm (1.8 m • kg)
4. Fill:
• transmission case
Transmission oil:
10W30 type SE or higher engine
oil or GL gear oil
Capacity:
0,11 L
AUTOLUBE PUMP AIR BLEEDING
The air bleeding must be done always the oil
tank is empty, when the intake lube is discon-
nected or the tank is disassembled.
NOTE:
The air bleeding must be done after filling the
oil tank.
1. Remove
• fan cover
• crankcase cover (right)
2. Remove
• drain screw
Let the oil flow out until the air bubbles have
been removed.
3-12
CHK
ADJ
Replace
(CS50)
(CS50Z)