Assembling The Brake Shoes - Yamaha CS50 Service Manual

REAR WHEEL
5. Measure:
• Thickness of brake shoes k a
Outside specified value
Brake shoes thickness
4.0 mm
<Limit>: 2.0 mm
6. Inspect:
• Drum brake inner surface
Oil/Scratches
7. Measure
• Drum brake inner diameter
Out of specification
Wear limit of brake drum
110.5 mm
EAS00570

ASSEMBLING THE BRAKE SHOES

When the brake shoe carrier plate is assem-
bled, reverse the removal procedure.
Bear in mind the following points.
1. Install:
• brake cam
NOTE:
Apply Grease with a lithium soap base on the
brake cam and pin
CAUTION:
After installing the brake cam, remove
excess grease.
2. Install:
• brake shoes
• return spring
NOTE:
Install with the mark
3. Install:
• wear indicator
• cam lever
NOTE:
• Align the projection of the wear indicator
with the line as shown.
• Align the punch marks
7-15
CHAS
Change
Replace
k
:
a
Replace
.
outwards.
.