Yamaha CS50 Service Manual page 149

FRONT FORK
3. Install:
• circlip
• dust seal
NOTE:
Couple the circlip correctly on the groove of
the outer tube
4. Fill:
• fork oil
Quantity (each front fork leg)
45 cc
Recommended oil
SAE 10W or equivalent
From fork leg oil level (from the
top of the inner tube, with the
inner tube fully compressed and
without the fork spring)
105 mm
NOTE:
Place the fork in a vertical position.
5. Install:
• fork spring
• collar
• spring stopper
• circlip
• rubber cap
NOTE:
• Before installing the spring stopper, apply
grease to the o-ring.
• Couple the circlip correctly on the inner tube
groove.
7-21
CHAS
.