Breville Recommends Safety First - Breville BEM410 Instruction Booklet

BREvILLE RECOMMENdS SAFETy FIRST

At Breville we are very safety conscious. We design and manufacture consumer products with
the safety of you, our valued customer, foremost in mind. In addition we ask that you exercise
a degree of care when using any electrical appliance and adhere to the following precautions.
IMPORTANT SAFEGUARdS
REAd ALL INSTRUCTIONS
BEFORE USE ANd SAvE FOR
FUTURE REFERENCE
• Carefully read all instructions before
operating and save for future reference.
• Remove any packaging material and
promotional stickers before using the
mixer for the first time.
• Do not place the mixer near the edge
of a bench or table during operation.
Ensure the surface is level, clean and
free of water, flour, etc. Vibration during
operation may cause the appliance
to move.
• Do not place this appliance on or near
a hot gas or electric burner, or where it
could touch a heated oven.
• Use only the beater, dough hook or
whisk supplied with this mixer.
• Never operate the mixer whilst the mixer
head is in the raised position.
• Ensure the speed Control Dial is in the
'0 – Stand By' position and the mixer is
switched off and unplugged from the
power outlet before attaching the beater,
dough hook or whisk.
• Do not operate the appliance
continuously on heavy loads for more
than 3 minutes.
• Handle the mixer and attachments with
care. Never place your fingers inside the
mixing bowl or near the beater, dough
hook or whisk during operation.
4
• Keep hands, hair, clothing, as well as,
spatulas and other utensils away from
moving beater, dough hook or whisk
during operation.
• Should an object such as a spoon or
spatula fall into the bowl while mixing,
immediately ensure the speed Control
Dial is in the '0 – Stand By' position, turn
the Mixer off, unplug at the power outlet
and remove the object.
• Do not place hands in the mixing
bowl unless the appliance is
disconnected from the power outlet.
Ensure the speed Control Dial is in
the '0 – Stand By' position, the mixer
is switched off and unplugged from
the power outlet before removing the
beater, dough hook or whisk.
• Ensure the motor and beater, dough
hook or whisk has completely stopped
before disassembling.
• Always remove the beater, dough hook
or whisk from the mixer before cleaning.
• Ensure the Mixer motor head is locked
into the horizontal (closed) position
when not in use and before storing.
• Always ensure the speed control dial is
in the '0 – Stand By' position, the power
is switched off at the power outlet and
the cord is unplugged from the power
outlet before attempting to move the
appliance, when the mixer is not in use
and before cleaning or storing.
• Do not use the mixer on metal surfaces,
for example a sink drain board.
• To protect against electric shock do not
immerse cord, plug or mixer in water or
any other liquid.