Breville BEM410 Instruction Booklet page 11

ASSEMBLy ANd OPERATION
ASSEMBLING THE MIxER
Before using your Breville mixer for the first
time, remove any packaging material and
promotional labels.
Ensure the speed control dial is in the '0 –
Stand By' position, the mixer is switched
off at the power outlet and the power cord
is unplugged.
Remove the mixing bowl, scraper beater,
whisk and dough hook and wash in warm
soapy water with a soft cloth. Rinse and dry
thoroughly. The bowl and the attachments
may be washed in the dishwasher.
NOTE
When first using your Breville mixer,
you may notice an odour coming from
the motor. This is normal and will
dissipate with use.
ATTACHING THE BOWL
1. Place the mixer stand on a level, dry
surface such as a bench top. The mixer
motor head should be in the horizontal
(closed) position.
2. Raise the mixer motor head by
depressing the tilt back hinge button,
then lift the mixer motor head up
until it tilts back and locks into the
open position.
3. Insert the mixing bowl into the bowl
locking recess of the mixer stand and
turn clockwise until the bowl locks
securely into place.
NOTE
To remove or insert the mixing bowl,
the mixer motor head must be raised
and locked into the open position.
11