System expansions
Installing and removing the accessible 5
/
inch drive
1
4
Fitting the drive cover for the 5
/
inch drive
1
4
•
Requirement: The casing is open (see section
"Opening the casing", Page
33).
To use the latch function of the accessible 5
/
inch drive, you must fit the corresponding
1
4
drive cover before installing the drive in the casing. Proceed as follows:
3
2
1
► Unlock the drive cover (1).
► Push the drive metal plate upwards (2) so it is released from the catches with which it is secured.
► Lift the drive cover away from the casing (3).
► Put the drive metal plate onto the
left-hand side of the drive (1).
1
Fujitsu Technology Solutions
35