No Mouse Pointer Displayed On The Screen - Fujitsu CELSIUS R920 Operating Manual

Cause
Wrong monitor has been set under Window XP
Wrong monitor has been set under Windows 7

No mouse pointer displayed on the screen

Cause
The mouse is not correctly connected.
Fujitsu Technology Solutions
Remedy
► Restart the device.
► Press F8 while the system is booting.
Either the Windows Advanced Start Options menu
or the menu for selecting the operating system
appears.
► If the menu for selecting the operating
system appears, press
► SelectSafe Mode or Safe Mode with Network.
► Go to Start – Settings – Control Panel – Display
and the tabs Appearance, Themes, Settings
to set the correct values for the connected
monitor as described in the operating
manual of the monitor.
► Restart the device.
► Press F8 while the system is booting.
Either the Windows Advanced Start Options menu
or the menu for selecting the operating system
appears.
► If the menu for selecting the operating
system appears, press the
► Select Safe Mode or Safe Mode with Network.
► Go to Start – Control Panel – Appearance
and Personalization – Display to enter the
correct values for the connected monitor as
described in the operating manual of the
monitor.
Remedy
► Shut down your operating system in the
proper manner, for instance using
Alt + Del .
► Switch the device off.
► Check that the mouse cable is properly
connected to the system unit. If you use an
adapter or extension lead with the mouse
cable, check the connections.
► Make sure that only one mouse is
connected.
► Switch the device on.
Troubleshooting and tips
F8 .
F8 key.
Ctrl +
29