Removing A Module Holder With Reader - Fujitsu CELSIUS R920 Operating Manual

System expansions

Removing a module holder with reader

• Requirement: The casing is open (see
► Disconnect the cables connected to the module holder.
► Remove the screws (1).
► Slide the module holder out of the casing in the direction of the arrow (2).
► Remove the reader from the module holder (see
the module holder", Page
"Installing a module holder with reader", Page
or
► Remove the reader from the module holder (see
holder", Page
► Close the casing (see
40
41) and reinstall the module holder (corresponds to
41) and install the metal and plastic cover in the drive bay.
"Closing the casing", Page
"Opening the casing", Page
1
1
"Removing the reader from
39).
"Removing the reader from the module
34).
33).
2
Fujitsu Technology Solutions