Installing and removing the accessible 5
Fitting the drive cover for the 5
To use the latch function of the accessible 5
drive cover before installing the drive in the casing. Proceed as follows:
► Open the casing (see
► Unlock the drive cover (1).
► Push the drive cover upwards (2) so it is released from the catches with which it is secured.
► Lift the drive cover away from the casing (3).
1
Fujitsu Technology Solutions
/
1
4
"Opening the casing", Page
3
1
/
inch drive
4
inch drive, you must fit the corresponding
35).
2
1
► Connect the drive cover to the drive (1).
System expansions
1
/
inch drive
4
37