Indicators On The Device - Fujitsu CELSIUS R920 Operating Manual

Indicators on the device

The indicators are on the front of the casing. Which indicators are available on your
device depends on the configuration level you have selected.
No. indicator
1 Drive indicators
2 Indicator for optional
components, e.g.
SmartCard reader
3 Power-on indicator
4 Hard disk indicator
5 USB Security
Fujitsu Technology Solutions
Description
The indicator lights up when the CD-ROM or DVD drive of the
device is accessed. You must never under any circumstances
remove the CD/DVD while the indicator is lit.
The indicator lights up when optional components, e.g. the
SmartCard reader, are accessed.
Caution:In energy saving mode, the device must not be
disconnected from the mains supply as this can cause loss of data.
• The indicator is illuminated:
The device is switched on.
• The indicator is flashing:
The device is in energy-saving mode. After being switched on
with the ON/OFF switch, the device powers up or returns to the
state it was in before it entered energy-saving mode.
• The indicator is not illuminated:
The device is switched off (disconnected from the mains) or is
ready to operate. If the device is ready to operate, it can be
switched on with the ON/OFF switch.
The indicator lights up when the hard disk drive in the device
is being accessed.
• The indicator is illuminated:
The device is switched on.
• The indicator is flashing:
An unauthorised USB access takes place on the device.
1
2
3
4
5
Operation
21