Config Snmp System_Location; Config Snmp System_Name - D-Link DGS-3100 Series Cli Manual

config snmp system_location

Purpose
Syntax
Description
Parameters
Restrictions
Example usa ge:
To co nfigure the Switch l

config snmp system_name

Purpose
Syntax
Description
Parameters
Restrictions
Example usa ge:
To co nfigure the Switc
DGS3100# config snmp system_contact MIS Department II
Success.
DGS3100#
To enter a description of the location of the Switch.
config snmp system_location <sw_location>
The config snmp system_location command enters a description
of the location of the Switch. A maximum of 255 characters can be
used.
<sw_location 0-255> - A maximum of 255 characters is allowed. A
NULL string is accepted if there is no location desired.
Only administrator-level users can issue this command.
ocation for "HQ 5F":
DGS3100 # config snmp system_location HQ 5F
Succes s.
DGS3100 #
To define the name for the Switch.
config snmp system_name <sw_name>
The config snmp system_name command defines the name of the
Switc h.
<sw_name 0-255> - A maximum of 255 cha
NULL string is accepted if no name is desir
Only administrator-level users can issue this command.
h name as "DGS-3100 Switch":
DGS3100# config snmp system_name DGS-3100 Switch
Success.
DGS-3100 Switch#
45
racters is allowed. A
ed.