Intermec PC23 User Manual page 163

PC23 and PC43 Desktop Printer User Manual
Media Settings (Continued)
Setting Description
Media Length Sets the length of the printable area
measured from one edge of the label to the
edge that is closest to the printhead. Unit of
measurement is defined in the Unit of
Measurement parameter.
Clip Default Determines if the printer prints items
outside the printable area of the label.
When this is set to Off, the printer returns
an error if any part of a bar code label
cannot be printed because that part extends
beyond the printable area. When this is set
to On, the printer prints all bar code labels,
but may also print unreadable, incomplete
labels.
Start Adjust Sets the length of media the printer feeds
(positive value) or retracts (negative value)
before printing a label. Unit of
measurement is defined in the Unit of
Measure parameter. Range is -9999 to
+9999.
Stop Adjust Sets the length of media the printer feeds
(positive value) or retracts (negative value)
after printing a label. Unit of measurement
is defined in the Unit of Measure parameter.
Range is -9999 to +9999.
Media Selects the mode the printer uses to
Calibration calibrate media. Use Slow if the printer has
Mode trouble identifying gaps or marks in media.
*935-044-001*
INTERMEC
6001 36th Ave W
Everett WA 98203
Appendix B — Default Settings
Default
Variable
Off
0
0
Fast
149