Intermec PC23 User Manual page 157

PC23 and PC43 Desktop Printer User Manual
Error Alert Default Settings (Continued)
Error Alert Status
Printhead Enable
Lifted
Printhead Not Disable
Detected
Information Alert Default Settings
Information Alert
Print Job Complete Disable 1
Started
Printer is rebooting Disable 1
Warning Alert Default Settings
Warning Alert Status
Ribbon Disable 1
Installed
Upgrading Disable 1
Firmware
Odometer Disable 1
(User
Resettable)
Odometer Disable 1
(Printer)
Replace Disable 1
Printhead
Clean Disable 1
Printhead
Faulty Dot Disable 1
Delay
Repeat Delay Unit
1 Occurrences
1 Occurrences
Delay
Status Repeat Delay Unit
Occurrences
Disable 1 Occurrences
Occurrences
Delay
Repeat Delay Unit
Occurrences Warning - Ribbon
Occurrences Warning - Upgrading
Occurrences Warning - Odometer (User
Occurrences Warning - Odometer
Occurrences Warning - Replace
Occurrences Warning - Clean printhead
Occurrences Warning - Faulty dot is
Appendix B — Default Settings
Message
Error - Printhead lifted
Error - Printhead not
detected
Message
Print job complete
Printer is started
Printer is rebooting
Message
installed
firmware
resettable) has reached a
preset value.
(Printer) has reached a
preset value.
printhead
detected
143