How To Print On Rfid Media - Intermec PC23 User Manual

Chapter 2 — Set Up the Printer

How to Print on RFID Media

62
3 Press to select Tools and then press
with Test Labels selected.
4 Press .
Test Labels
Print Quality
Resources
Printer Information
Printer Settings
5 Select Print Quality, Printer Information, or Printer Settings,
and then press
6 Select a label to print, and then press
If you have an LCD printer with the optional RFID module installed,
you can print on RFID media. Media containing RFID tags is slightly
thicker where the RFID tag is located. The slight thickness of this part
of the label may affect print quality. For thermal transfer labels,
Intermec recommends using high-quality ink ribbon.
To achieve the best possible print quality, follow these guidelines:
• Run the RFID calibration wizard to determine the best Tag
Position and Output Power for RFID media.
• If necessary, modify the Tag Position (TAGADJUST variable) to
make sure the RFID labels are properly aligned with the antenna.
• Avoid printing on the thickest part of the label when possible.
For help configuring RFID parameters, see the
Command Reference Manual
Manual.
. A list of available labels appears.
or the IPL Command Reference
PC23 and PC43 Desktop Printer User Manual
. The Tools menu appears
.
Intermec Fingerprint