About Tear-Off Printing
PC23 and PC43 Desktop Printer User Manual
In tear-off printing, you manually tear printed labels, tickets,
wristbands, and other printed media from the front of the printer.
After you load media, you need to configure the feed adjust settings.
These settings allow for printing from the top edge of the label. You
may need to adjust the recommended values slightly depending on
your media type, supply method, and roll sizes, or because of
individual differences between printers.
Note: Feed adjust values for simulator command languages like ESim,
ZSim, and DSim are preset.
Recommended Feed Adjust Values for Tear-Off Printing
Printer
Setting
PC23d
Start Adjust
Stop Adjust
PC43d
Start Adjust
Stop Adjust
PC43t
Start Adjust
Stop Adjust
Chapter 2 — Set Up the Printer
203 dpi
300 dpi
Distance
-113
-168
-14.24 mm (-0.56 in)
0
0
0 mm (0 in)
-124
-183
-15.50 mm (-0.61 in)
0
0
0 mm (0 in)
-108
-160
-13.60 mm (-0.54 in)
0
0
0 mm (0 in)
37