Set The Command Language From The Main Menu; Set The Command Language With The Print Button - Intermec PC23 User Manual

Set the Command Language from the Main Menu

Set the Command Language with the Print Button

PC23 and PC43 Desktop Printer User Manual
If you have an LCD printer, you can change the printer command
language from the Main Menu.
1 Make sure that the printer has media and ribbon (if necessary)
installed.
2 From the Ready screen, press
3 In the Main Menu, select Settings > System Settings > General.
4 In the General settings list, press
Language.
5 Press or to select a different command language.
6 Press or
7 Press to save your changes.
If you are prompted to enter a password for ZSim, the password is
1138. To return to the Fingerprint menu system from ZSim, the
password is 8311.
If you have an icon printer, you can use the Print button to set the
printer command language.
1 Make sure that the printer has media and ribbon (if necessary)
installed.
2 Turn off the printer.
3 Turn the printer back on. All the LEDs light up. As the printer
starts up, the LEDs turn off one by one, starting with the bottom
right LED.
4 When the last two LEDs (Maintenance and Bluetooth) are lit, press
. The printer feeds a few labels as it automatically
and hold
adjusts the media feed, and then the test labels start to print.
5 Continue to hold
start to print.
. The Main Menu appears.
.
. The available printer command languages
Chapter 1 — About the Printers
to scroll to Command
21