Use A Wizard; About Printer Command Languages - Intermec PC23 User Manual

About Printer Command Languages

PC23 and PC43 Desktop Printer User Manual

Use a Wizard

The available wizards depend on the hardware you have installed in the
printer.
1 From the Ready screen, press
2 Select Wizards and press
3 Select a category and press
4 Select a wizard from the list and press
5 In a wizard:
• Use or to select items in a list.
• Press to select the highlighted item.
• Select and press
A printer command language is a set of instructions that controls
printer functions:
• Configure the printer.
• Return the status of the printer.
Control peripheral devices.
•
• Format a label or receipt for printing.
The printer supports these command languages and language
simulator support options:
Fingerprint
•
• Direct Protocol (DP)
• IPL (Intermec Printer Language)
• ESim (EPL command language simulator)
• ZSim (ZPL command language simulator)
DSim (DPL command language simulator)
•
• Smart Printing
• ESim/ZSim Auto-Configuration
Chapter 1 — About the Printers
. The Main Menu appears.
.
.
. The wizard begins.
to continue to the next screen.
17